I have reloaded the deleted the flow chart and re-added and it is still not filling in the correct and changed value after tabbing out of it. Is there anything else I can try to complete these steps?
top of page
MaxzPlace
Help Forum
Sorry you're stuck but there's almost always a pretty easy fix! Do NOT try to start all over again, eg. uninstall Max's Pitch Package, etc. That can make things worse.
​
Before you post make sure you check the Help FAQ for an instant solution first. Then, if you can't find it there, you can post your problem here and we'll get to it ASAP (within 24 hours), but be sure you:
​
-
post in the right category
-
INCLUDE AT LEAST ONE SCREENCAP IN YOUR POST TO SHOW THE PROBLEM!!!!!!!!
-
explain the problem clearly
bottom of page
Then you maybe didn't correctly select Lead as the type of record that triggers the flow back in Step 38? If so, it's easiest to just abandon this flow and start it again and make sure you get Lead selected in Step 38.
If that's not the issue and your maybe at NKU, then you might not be using the latest version of the lab instructions but your instructor by now should have posted the updated version. Here's a direct link to it you can use:
Let me know, ok?